Aurender A10 is a high -performance combination of digital turntable front -stage DAC music player. Internal configuration 4TB of internal hard disks and a 120GB high -speed cache solid -state hard disk are used to play. It may be a solution to replace the CD player.
Aurender A10 uses a precision clock generation system to program the on -site programming door array(FPGA)A combination of jitter less than 100 flylose reduces the clock generator to make digital audio data transmission accurate time, minimizing the jitter to the level that can be ignored.
Aurender A10 provides 4TB of hard disk storage and 120G solid -state hard drives for caching music playback. If the selected song or album is cached to a solid -state hard disk, the mechanical hard disk used to store music will enter a dormant state. You can minimize the wear on the hard disk. By playing with a cache song to the solid -state hard disk, you can completely eliminate electronic noise generated by disk rotation.
Aurender A10 uses a dedicated USB audio 2.0 output design to provide a transparent audio signal with no noise. When not in use, you can turn off the power to USB audio output according to the requirements of the USB DAC. Aurender A10 uses flagship dual -channel chips and separated full -line power modules.
Aurender A10 Main performance characteristics:
- balance(XLR)/Non -balanced audio output(RCA)
-Driven 768kHz/32bit''''''''s new generation flagship AK4490 DAC chip
-Che 4 independent ring power transformers
-Or support Aurender family''''''''s AREnder Conductor APP
-MM and NAS (network additional storage) technical support
-4TB of hard disk storage and 120G solid -state hard drive high -speed cache play
-The full -line power supply and special shielding treatment to prevent noise from being transmitted to sensitive DAC
-The electronic noise of complete isolation asynchronous USB audio data block
-Dype audio USB2.0 output uses ultra -low noise power circuits
-The humanized volume adjustment method: you can adjust the volume through the remote control, you canAdjust the volume through the Aurender app, you can adjust the sound volume through the front board rotation button
-Margo network technical support
Use guidelines:
1. Aurender player can be connected to the home router with a network cable, or you can use the USB port behind the machine to emit wireless signals with a Wi-Fi rod, and the iPad can be connected to its hotspot signal. The default password of the Wi-Fi connection is Aurender12345.
2. Open the Aurender App after the network connection, and click the gear icon to set the machine. Its music resources can be seen in 3 parts: Music is a built -in hard disk, NAS is a music resource on the connected router, and USB is the music resource connected to the USB port behind(Mobile hard disk or U disk).
3. There are two ways to copy music to Aurender built -in hard disk: 1)The music is integrated on a mobile hard disk, inserted to the USB port behind Aurender, then browsed to USB music with the app, click "Copy" above the screen, and copy the selected music to the built -in hard disk. 2)If the music is on a computer, you can connect to the same local area network where Aurender is located, and then access the Aurender built -in hard disk through the local area network(The default username and password are Aurender)Copy the music in.
4. The total power switch of the machine is behind, and the front panel is available. Pay attention to the shutdown switch when shutting down, and then wait for it to stop flashing and then turn off the total power supply(You can also keep the total power for a long -term standby)Essence If the total power supply is cut off prematurely or interrupts the power, the next time it may take a longer time to wait for the system to automatically repair.
parameter
Net weight | 430 x 55 x 353 (mm) 16.93 x 2.2 x 13.9 (inches) / 10.2Kg 22.5 lbs |
SSD for System and Cache | 120G |
Built -in music storage | 4TB (2.5" HDD) |
powered by | Pure linear power supply |
Display | 3.0" AMOLED |
Digital output | USB Audio Class 2.0 |
Digital input port | SPDIF Optical up to 24-bit / 192 kHz |
Other interfaces | Gigabit Ethernet, USB Port x 2 |
Analog output | Unbalanced(RCA): 2Vrms / Balanced(XLR): 4Vrms |
volume control | -90 dB ~ 0dB, 0.5 dB step Velocity Sensitive Operation |
USB output specification | PCM: up to 32-bit / 384 kHz DSD: DSD64, DSD128 / DoP Mode |
DAC Chip | AK4490(AKM) x 2 (Dual-Mono Design) |
THD + N | Min. -112dB, IMD(SMPTE) Min. -113 dB |
THD (1KHz 2.5Vrms XLR output) | 0.00013 % |
Dynamic Range | MAX 128 dB (CCITT filter) |
Channels | Better than -135dB, 20-20kHz. |